High Speed Plastic Oil Bottle Blow Molding Machine
Plastic blow molding machine: ABLB65
Key word: Blow Molding machine, Bottle blow molding machine
This type of machine is suitable to produce different shapes of plastic bottles from 100ml to 5L.
Adopt Mitsubishi PLC from Japan.
Contactor use Schneider from France.
Most of spareparts of hydraulic system and pneumatic system are imported from Japan, Korea, France and Taiwan, China to ensure the quality of the machine.
Max. Product volume |
5 liters |
Out put capacity |
180~210 pc/h |
Screw diameter |
65mm |
Screw L/D ratio |
24 L/D |
Screw drive power |
18.5 KW |
Screw heating capacity |
6 KW |
No.of heating zone |
3 zones |
Output of HDPE |
80KG/H |
Oil pump drive power |
7.5 KW |
Clamping force |
45KN |
Max.size of mold |
80-350mm |
Mold stroke |
320 X 360mm |
Max.die diameter |
140mm |
Blowing pressure |
0.6 mpa |
Air Volume |
0.6 M ³ /MIN |
Cooling water pressure |
0.3mpa |
Water consumption |
65 L/MIN |
Size of Machine |
2.95x2x2.7m |
Weight of machine |
6.7ton |
The main components of the machine( ABLB65 II ):
electronic parts |
|
Name |
Trader |
Micro computer control system |
Japanese MITSUBISHI |
Temperature Controller |
TAIWAN YANHUA PID |
Auxiliary Relay |
OMRON |
contactor |
Schneider from France |
Electric motor |
Three phase 220V or 380V |
Power Source |
TAIWAN MEANWELL |
Transducer |
TAIDA FROM CHINA |
hydraulic parts |
|
Name |
Trader |
Oil pump |
TAIWAN HIGH-TECH |
Valve |
JAPAN YUKEN |
Oil pump and connection |
JAPAN YUKEN |
Sealed part |
HALLITE |
air control system |
|
Name |
Trader |
Cylinder |
AIRTAC |
Air Valve |
FESTO |